TOCHI
Newbie level 5
- Joined
- Oct 11, 2013
- Messages
- 8
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 85
pls, i need held help on using keil compiler for c to write a code to display information on LCD, pls i need urgent help.
I am using 89s52 microcontroller and my code is shown below:
how do i control the RW, RS and E pins of the LCD?
pls, include diagram and code.
I am using 89s52 microcontroller and my code is shown below:
Code:
#include <reg52.h>
#include <stdio.h>
#define LCDData P1 //LCDData declaration
sbit En=P2^0; //the enable pin
void main(void)
{
unsigned char message[] = “The Earth is but One Country”;
unsigned char z;
for (z=0;z<28;z++) //send 28 characters
{
LCDData=message[z];
En=1; //a high-
En=0; //-to-low pulse to latch data
}
}how do i control the RW, RS and E pins of the LCD?
pls, include diagram and code.
Last edited by a moderator: