[ARM] interfacing glcd 128x64 with lpc2148

joel george · Oct 2, 2014

hiiii
i am finding it difficult to interface glcd 128x64 with lpc2148....escpecially i am not aware about the value of pull up registers to be used along the pins of glcd with lpc2148..
cud sumone help me wid the interfacg??does anyone have the diagram to interface??plssss

udayan92 · Oct 3, 2014

This covers nearly everything you need to know and what tasks you should do to get the GLCD interfaced properly.
**broken link removed**

joel george · Oct 3, 2014

udayan92 said:
This covers nearly everything you need to know and what tasks you should do to get the GLCD interfaced properly.
**broken link removed**

But sir it doesnt specify the register values dat i need to connect ..the trim pot values nor the voltage supply

udayan92 · Oct 4, 2014

the value of pull up registers to be used along the pins of glcd with lpc2148..

I think you mean,pull up resistors.Go through this tutorial to get an idea on how to compute pull up resistor value(s).
https://learn.sparkfun.com/tutorials/pull-up-resistors

[ARM] interfacing glcd 128x64 with lpc2148

joel george

Junior Member level 1

udayan92

Full Member level 5

joel george

Junior Member level 1

udayan92

Full Member level 5

Similar threads

[ARM] interfacing glcd 128x64 with lpc2148

joel george

Junior Member level 1

udayan92

Full Member level 5

joel george

Junior Member level 1

udayan92

Full Member level 5

Similar threads

Privacy & Transparency

Privacy & Transparency