Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Interfacing EZTouch HMI with AVR using MODBUS.

Status
Not open for further replies.
V

venz

Full Member level 2
Full Member level 2
Joined
May 30, 2001
Messages
129
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
795
myavr modbus

Does anybody have any experiance with a HMI and MODBUS protocol?
I want to interface an EZTouch HMI with an AVR microcontroller using the MODBUS protocol (Or any other protocol, as long as it's simple).

greetz, venz..
 

avr modbus

I have implemented MODBUS serial ASCII slave in AVRco multitasking pascal.

Then I connected my AVR devices directly to Citect SCADA, and with Modbus OPC server to SmartSCADA, Siemens WinCC and Citect.


Avra
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top