abusid1170
Newbie level 5
- Joined
- May 13, 2013
- Messages
- 9
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Chennai,India
- Activity points
- 1,344
Hey guys!
I am trying to read the output voltage value of TGS822 sensor using arduino's analog pins.
through serial communication i wish to plot it in the MATLAB.(I want to see the variation of the sensor value as a plot).That's my objective.
But the problem is,
*multimeter and the arduno's serial monitor shows different readings.
*normally sensor output value fluctuates between say(0.67 and .68) and it goes to next value.it wouldn't remain in a constant value.
but i dont want this fluctuation to be seen in my plot.
*if arduino shows the reading correctly ,then interfacing with the matlab stands as an another problem.It plots different values.
thanks for reply in advance.
If u hav another idea ,please putforward
I am trying to read the output voltage value of TGS822 sensor using arduino's analog pins.
through serial communication i wish to plot it in the MATLAB.(I want to see the variation of the sensor value as a plot).That's my objective.
But the problem is,
*multimeter and the arduno's serial monitor shows different readings.
*normally sensor output value fluctuates between say(0.67 and .68) and it goes to next value.it wouldn't remain in a constant value.
but i dont want this fluctuation to be seen in my plot.
*if arduino shows the reading correctly ,then interfacing with the matlab stands as an another problem.It plots different values.
thanks for reply in advance.
If u hav another idea ,please putforward