Rickyrb101
Newbie level 5
- Joined
- Feb 21, 2010
- Messages
- 8
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Newcastle Upon Tyne
- Activity points
- 1,343
Hi,
Interfacing a usb device with wifi to transfer 8.91Mbps (Max) to a PC.
Basically I need to make my USB device wireless without using WUSB.
Was wondering if anyone has any information on how this might be achieved. I was origionally planning to use zigbee as the vendors data on the usb device was misleading, which lead me to believe I would be facing a much lower data rate.
Now with this data rate and a range of 30 - 40 metres I understand that the only real option is 802.11a/g. Even a rf module is theoretically possible I understand but I cannot find one which will support this data rate.
Thank you for your time guys.
Interfacing a usb device with wifi to transfer 8.91Mbps (Max) to a PC.
Basically I need to make my USB device wireless without using WUSB.
Was wondering if anyone has any information on how this might be achieved. I was origionally planning to use zigbee as the vendors data on the usb device was misleading, which lead me to believe I would be facing a much lower data rate.
Now with this data rate and a range of 30 - 40 metres I understand that the only real option is 802.11a/g. Even a rf module is theoretically possible I understand but I cannot find one which will support this data rate.
Thank you for your time guys.