zentos
Member level 1
- Joined
- Apr 7, 2014
- Messages
- 33
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 6
- Activity points
- 278
Hi there,
I'm a newbie and tried to dial a no from MCU (16F887) to Sony Erricsson K750i. With hyper terminal connected with data cable to pc it works AT commands fine.But I couldn't communicate SE750i with MCU. I have attached schematic I used (drawn by me) and the flowcode program that I used. Please help me to get this done, really appreciate.
Supported links
https://pinouts.ru/CellularPhonesCables/sony_ericsson_service_cable_pinout.shtml
I'm a newbie and tried to dial a no from MCU (16F887) to Sony Erricsson K750i. With hyper terminal connected with data cable to pc it works AT commands fine.But I couldn't communicate SE750i with MCU. I have attached schematic I used (drawn by me) and the flowcode program that I used. Please help me to get this done, really appreciate.
Supported links
https://pinouts.ru/CellularPhonesCables/sony_ericsson_service_cable_pinout.shtml
Last edited: