markito86
Newbie level 6
- Joined
- Mar 23, 2011
- Messages
- 14
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,375
Hi all,
I have two fixed square waveguides with slightly different cross section, and they are shifted along x and y axis.
I have to design (in HFSS) a waveguide interconnection that allow this connection and implement the x-y shift.
I have just tried to use mitered and continuous bands (with a single step for the cross section) but the Return Loss is too low.
Could you help me.
Valuable suggestions and help would be much better and appreciable.
Marco
I have two fixed square waveguides with slightly different cross section, and they are shifted along x and y axis.
I have to design (in HFSS) a waveguide interconnection that allow this connection and implement the x-y shift.
I have just tried to use mitered and continuous bands (with a single step for the cross section) but the Return Loss is too low.
Could you help me.
Valuable suggestions and help would be much better and appreciable.
Marco