I have an intercom that works through mains.
My problem is that the two appartments I want to communicate are supplied from different phases. One from R and the other from S. What can I do in order to communicate between the two appartments via intercom ?
Note I've heard that one solution is to bridge the phases with caps ! Is this a good idea?
It depends on your carrier.But if it's high enough,you can indeed try using a capacitor between the two phases.
I would use 1uF/680V.
Mind you that the voltage between the phases is around 380 V rms.
hello every body ,
can you please provide me the circuit you used for your application. i too want to communicate susing power lines and failed a lot of times.
please provide me the circuit at narender_aec_eee(at)yahoo.com