installing and Importing TSMC 65nm standard cell libraries in Cadence Virtuoso

Hi

I am using TSMC 65nm PDKs, and I ran the pdkInstall.pl. I answered questions about tecnology etc

" - TSMC Process Design Kit (PDK) Install Utility V1.0a -

This perl script is used to install TSMC PDKs from the directory that
contains the original distribution source files (a super-set of PDKs) to a
specified destination directory according to the user specified options.

*Available process types are:
1 - LO
2 - MM
3 - RF
Please enter your choice: (1,2...)
*Available voltages are:
1 - 1.2V / 2.5V / 2.5V under-drive 1.8V / 2.5V over-drive 3.3V
2 - 1.2V / 3.3V
Please enter your choice: (1,2)
*Available types of MiM cap are:
1 - MIM_1.0fF
2 - MIM_1.5fF
3 - MIM_2.0fF
Please enter your choice: (1,2...)
*Available metal options are:
1 - 1p9m_6X2Z0U_ALRDL
2 - 1p8m_6X1Z0U_ALRDL *ind_1z
3 - 1p8m_5X2Z0U_ALRDL
4 - 1p7m_5X1Z0U_ALRDL *ind_1z
5 - 1p7m_4X2Z0U_ALRDL *Star_RC *Cal_RC *QRC
6 - 1p6m_4X1Z0U_ALRDL *ind_1z *Star_RC *Cal_RC *QRC
7 - 1p6m_3X2Z0U_ALRDL
8 - 1p5m_3X1Z0U_ALRDL *ind_1z

*ind_1z1u : Support inductors in RF Process:
"spiral_std_mu_z", "spiral_sym_mu_z", and "spiral_sym_ct_mu_z"
*ind_1u : Support inductors in RF Process:
"spiral_std_mu_a", "spiral_sym_mu_a", and "spiral_sym_ct_mu_a"
*ind_1z : Support inductors in RF Process:
"spiral_std_mza_a", "spiral_sym_mza_a", "spiral_sym_ct_mza_a"

*For more information about inductor support, please refer to PDK_doc/ReleaseNote.txt

Please enter your choice: (1,2...)
Please confirm with your selection information:
*********************************************************
*** Select process : MM
"tsmcPdkInstall.log" 240L, 12058C.....""

Now the question is , How do i import them (PDK libraries) in virtuoso ? Can someone give me some documentation or link?

put a line like

INCLUDE /myinstalldirectory/CRN65LP_v1.5a_official_IC61_20091204_b/cds.lib

into your cds.lib file of the working directory before you start virtuoso. Then it should show up in library manager.

micpro said:

put a line like

INCLUDE /myinstalldirectory/CRN65LP_v1.5a_official_IC61_20091204_b/cds.lib

into your cds.lib file of the working directory before you start virtuoso. Then it should show up in library manager.

Click to expand...

Thanks lot for your help ..