Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

information about fast 8051 core needed

Status
Not open for further replies.

zhanzy

Newbie level 6
Newbie level 6
Joined
Dec 18, 2002
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
18
4t-8051 synopsys

Where can I find some information about fast 8051 core, which use 4 clock as one instruction cycle?
 

zhanzy

Synopsys DesignWare DW8051 is a 4T fast 8051 core.
 

See this links, you will get the datasheets
h**p://www.int#l.com/design/MCS51/docs_mcs51.htm
#->e
 

Analog device's make is also faster. please check.
 

Look at **broken link removed**. They have 8051 up to 50MIPS.
 

Look at
**broken link removed**
 

hi,many core can do this.winbond have a 4 clock 8051 core,which is cheaper.these chips above are more expensive.see:
h**p://www.winbond.com
chips such as 77e54,77e58 will be good choice.
REGARDS.
 

Hello, zhanzy

You can find some on philips web.
Esp. 6-clks of LPC7XX and 2-clks LPC9XX.
If you want faster one please check sygnal's uC.

Good luck.
:roll:
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top