Info for building an universal programmer

[nex]

Hi,

I want to build an universal programmer, but I need some information... I hope that someone worked with programmer like: Pilot series, Dataman, Xeltek SP series, ALL-11, LV 48- Micromaster... And if did, maybe looked inside one to see what's inside I want to find what type of IC's are there especially the pin(s) driver(s). I don't know who make such things, or how to get one Are they custom made ? I don't think that's easy to build one...

Greetings !!!

 

[dainis]

expro-60

Look:
http://www.telemaster.ru/cnclab/bidie.htm
http://www.willem.org/

 

[Rope]

universal programmer schematic

These two programmers are lower level then pro that you mention but thats a fact its not easy to build a pro programmer they use a high speed DACs to drive the IC pins and CPU with firmware to command the interface so they are expensive to build at home!

 

[dainis]

labtool 48 schematic

These two programmers are lower level then pro that you mention but thats a fact its not easy to build a pro programmer they use a high speed DACs to drive the IC pins and CPU with firmware to command the interface so they are expensive to build at home!

More real is making other electrinic project, and from these money buy pro programmer (maybe used) (like Advantech Lab Tool 48 ) ....

 

[nex]

universal programmer homemade

Hi,

Yes, I understand, isn't easy to build something pro...
I find on internet devices like EL7156 or EL 7158 (made by Intersil), looks good, but I have to use at least 40, and that's only if I can find, perhaps samples...
Anyway, I like challenges

Cheers !

 

[dainis]

micromaster programmer same as advantech

Hi,

Yes, I understand, isn't easy to build something pro...
I find on internet devices like EL7156 or EL 7158 (made by Intersil), looks good, but I have to use at least 40, and that's only if I can find, perhaps samples...
Anyway, I like challenges

Cheers !

Hardware is only part of problem, you also nead software for programmer with very, very big count of devices .....

 

[nex]

all03 schematic

Hi,

I know, hardware is only part of problem...
After the hardware is set, software is next...
Anyway, I have plenty of time ( I gues...) I visited that russian link, it's a start but I wil choose that solution (home made pin driver) only if I run out of options... I hope that will not happen

Cheers !

 

[BENOIT]

программатор expro-80

have a look to these resources pages :
**broken link removed**
see schematics, software with sources, etc.
any comments regards these pages appreciated.
MB.

Hi,

I know, hardware is only part of problem...
After the hardware is set, software is next...
Anyway, I have plenty of time ( I gues...) I visited that russian link, it's a start but I wil choose that solution (home made pin driver) only if I run out of options... I hope that will not happen

Cheers !

 

[nex]

all-03 programmer

have a look to these resources pages :
**broken link removed**
see schematics, software with sources, etc.
any comments regards these pages appreciated.
MB.

Hi BENOIT,

I was there, and if I understand, I must have the All-03 or Expro, or to build one after those schematics Anyway, now I have an ideea, how to build a pin driver... at least 40 pins... Hard work
My intention was to find some information about the pin driver used in today programmers...
I downloaded Expro schematics, TNX

Cheers !

 

[SphinX]

sunshine expro-80

Hi,

There are full schematics for Expro-60 Universal Programmer & Tester with the JEDEC files.

h**p://matthieu.benoit.free.fr/all03/source/diagrams.zip

Software

h**p://www.danbbs.dk/~rmadrm/expro.htm

Great Site! & Thanx BENOIT


Sphinx

 

[BENOIT]

universal programmer all03a software

there also the diagram of the expro 80 : the expro80 is equivalent
to the all03a as the expro60 is equivalent to the all03 both softwares
sunshine/hilo/custom software works on both programmers.
**broken link removed**

Anybody would have information about the SMS Sprint expert
Module on the S100 ISA board . this module allows you to use
the Sprint expert TOP40DIP with the latest sofware available on dataio
site . Any data about this programmer appreciated
res. page **broken link removed**

Also I am looking for Software Exfile to use with an Elan Programmer
Res. file **broken link removed**

Also I am looking for the documentation of dataio chiplab programmer
(I have the software but am looking for a scanned documentation)


See also other resources on Eprom Programmer at the main page left
corner .

one interesting programmer today would be labtool-48 or dataman-48
but i have no sources for hardware nor software for it . interesting
thing is that the diagrams of the adapters are given .

I am interested to collected any data about universal programmers
MB.

Hi,

There are full schematics for Expro-60 Universal Programmer & Tester with the JEDEC files.

http://matthieu.benoit.free.fr/all03/source/diagrams.zip

Software

**broken link removed**

Great Site! & Thanks BENOIT


Sphinx