Infinite board in CST MWS?

Status
Not open for further replies.

mauloftin

Full Member level 6
Joined
Oct 29, 2008
Messages
355
Helped
62
Reputation
122
Reaction score
36
Trophy points
1,308
Location
CZ
Visit site
Activity points
3,285
Hi,
I have infinite board (material with eps.r) and I would like to simulate S parameter - exactly S11 and S21 in CST MWS. Is it possible? How can I simulate reflection and insertion lost this board? Can I use "waveguide port" in free space?

Thank you very much!
 

So, my question, my answer:

It is easy! It is about set correct boundaries only That is all.

 

hello mauloftin,
I have a same problem to solve. What are the dimensions you choose for the slab?

Thanks
 

Hi,
dimensions for the slab is no problem, try it. Is not good to do it very very small, try one size and after one large size and result must be same, if wouldn't be same, first size is too small.
 

I chose a 100x100x50 mm dimension slab of air,used a waveguide port and the same boundary conditions as specified in your figure. But S11 comes out to be 0.9...I can't understand the reason. Also I specify only one mode for the source (shows as a warning).
 

mauloftin said:
Hi,
dimensions for the slab is no problem, try it. Is not good to do it very very small, try one size and after one large size and result must be same, if wouldn't be same, first size is too small.
Click to expand...

Hello mauloftin,

PFA the cst file. This is a sample problem with only one layer but I have many layers in actual problem.
 

Attachments

  • air.rar
    8.9 KB · Views: 66

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…