whitewiz
Member level 3
For 100MHz low noise preamplifier design on the breadboard, the load inductor is
around 1.2uH for my design. I want to show the bandwidth between 70MHz and
130MHz for this amplifier.
Should I consider the SRF(Series resonant frequency) for bandwidth ?
Or care about center frequency (100MHz) ?
I am considering IM-10RFCL-12 which has 1.2uH and 124MHz SRF.
This is the link of the component.
**broken link removed**
Chris
around 1.2uH for my design. I want to show the bandwidth between 70MHz and
130MHz for this amplifier.
Should I consider the SRF(Series resonant frequency) for bandwidth ?
Or care about center frequency (100MHz) ?
I am considering IM-10RFCL-12 which has 1.2uH and 124MHz SRF.
This is the link of the component.
**broken link removed**
Chris