Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Inductor value with SRF for amplifier design

Status
Not open for further replies.
W

whitewiz

Member level 3
Member level 3
Joined
Oct 12, 2006
Messages
62
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Location
LA
Activity points
1,752
For 100MHz low noise preamplifier design on the breadboard, the load inductor is
around 1.2uH for my design. I want to show the bandwidth between 70MHz and
130MHz for this amplifier.

Should I consider the SRF(Series resonant frequency) for bandwidth ?
Or care about center frequency (100MHz) ?

I am considering IM-10RFCL-12 which has 1.2uH and 124MHz SRF.

This is the link of the component.
**broken link removed**

Chris
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top