cupoftea
Advanced Member level 6
Hi,
We wissh to use the 4.7uH inductor IHLP8787 with our surge buck converter, which only works for 500ms at a time. (ie during the surge , to protect the input from the surge)
Vin = 175vdc vout = 36vdc, iout = 8A, fsw = 350khz
IHLP8787 4.7uH inductor
The core loss calculator for it gives a nonsense output.
Is that because the voltage is too much?
We wissh to use the 4.7uH inductor IHLP8787 with our surge buck converter, which only works for 500ms at a time. (ie during the surge , to protect the input from the surge)
Vin = 175vdc vout = 36vdc, iout = 8A, fsw = 350khz
IHLP8787 4.7uH inductor
The core loss calculator for it gives a nonsense output.
Products - Inductors - IHLP® Inductor Loss Calculator Tool Landing Page - IHLP® inductor loss calculator tool | Vishay
Vishay’s IHLP Core Loss Calculator is a free tool that assists designers in selecting the proper IHLP inductor based on the operating conditions of their circuit.
Is that because the voltage is too much?