Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Incremental Sigma Delta ADC

Status
Not open for further replies.
C

captab

Junior Member level 3
Junior Member level 3
Joined
Jul 10, 2006
Messages
31
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,511
Hi,

Need input on Incremental Sigma Delta ADC.Suppose Vref=1.0V and I need 10-bit.In this case, the minimum converion time is 1.024mS considering 1MHz clock.Can I achieve the same 10-bit resoultion using say 100MHz if there is no restrcition on Power or in general what decides the maximum converation rate for incremental ADC?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top