rhnrgn
Member level 5
- Joined
- Dec 25, 2013
- Messages
- 92
- Helped
- 2
- Reputation
- 4
- Reaction score
- 2
- Trophy points
- 1,288
- Activity points
- 2,069
Hello,
We are using your SFH6732 model Vishays optocoupler.
We applied 5V to its VCC and 24V 6.2ma to its input.
When i measure its output i see 3.8V. In order to make a PIC's input pin high, voltae should be at least 4V.
Can i do anything in order to get at least 4V from optocouplers output except increase Vcc. Can i use pull-ups?
Thank You.
Datasheet
https://www.vishay.com/docs/83685/sfh6731.pdf
Reference Designs
**broken link removed**
We are using your SFH6732 model Vishays optocoupler.
We applied 5V to its VCC and 24V 6.2ma to its input.
When i measure its output i see 3.8V. In order to make a PIC's input pin high, voltae should be at least 4V.
Can i do anything in order to get at least 4V from optocouplers output except increase Vcc. Can i use pull-ups?
Thank You.
Datasheet
https://www.vishay.com/docs/83685/sfh6731.pdf
Reference Designs
**broken link removed**