In VLSI, what is called via and contact?

Status
Not open for further replies.

W_Heisenberg

Full Member level 4
Joined
Feb 27, 2011
Messages
217
Helped
6
Reputation
12
Reaction score
6
Trophy points
1,298
Location
Boston
Activity points
2,575
I think via is between metals

contact is metal and other non-metal things.

is this correct?
 

Contact is connection to source, drain or poly. While vias is used to make connection between two metal layers. Both vias and contact are formed using metals. Vias are generally made of tungsten while contact is made using aluminum.


**broken link removed**


**broken link removed**
 
Thanks, so professtional!

 

Hi Yadavvlsi,
Thanks much for the clear information. Are these diagrams taken from some book or document. Will appreciate if you can point us to the source...
I am a RTL guy and a complete newbie when it comes to PD. Can you please point to some resources to help me get started...

Thanks much,
Beo
 

W_Heisenberg said:
I think via is between metals

contact is metal and other non-metal things.

is this correct?
Click to expand...

Contact is the hole in the dielectric to make connection between Metal 1 and underlying Polysilicon or doped Silicon.
Polysilicon is mainly used as gate material in MOSFET and n or p-doped silicon is used as Source/Drain regions.

Via is the hole in the dielectric to make connection between two metal layers. Example: Metal 1 to Metal 2, Metal 2 to Metal 3, etc.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…