babbage
Member level 1
In BUCK, if I make use of the voltage-mode control, how to get the loop gian according to the line & load regulation??
For example load regualtion is 10mV/A, Vin=5.0V, Vout=3.0V, Iload=0~500mA, according to this parameters, how to get the loop gian? How to calculate this?
For example load regualtion is 10mV/A, Vin=5.0V, Vout=3.0V, Iload=0~500mA, according to this parameters, how to get the loop gian? How to calculate this?