Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Illuminated message on the screen NEC MultiSync LCD 2070nx

Status
Not open for further replies.

Jonyk

Newbie level 2
Newbie level 2
Joined
Jan 29, 2017
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
13
Good afternoon, tell me how to remove the message on the monitor screen NEC 2070nx: DEMO MODE DV MODE ОFF.
In the upper right corner. Steady and interferes with the operation, it is impossible to turn off through the settings. Help me please. P_20170129_122749.jpg
 

See if there is an advanced menu by turning on the display with holding POWER and SELECT buttons down for at least one second.

Larry G
 

Dear Larry. You write that the details of the expanded menu on the screen, because it is impossible to remove this message on your instructions. At some point we must hold these buttons simultaneously. Thanks for the answer.

Jony. K
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top