if else pls help.. i have a doubt on my code with this....

while(1)
   {
     while(1)
     {
          do{ dat = Soft_Uart_Read(&err); }while(err);
          if(dat == 'O'){ break; }
          if((mypbuff == 0) && (dat != 'I')){ continue; }
          mybuff[mypbuff++] = dat;
          if(mypbuff == 53)
          {
               ptr = strtok(mybuff, ",");     //mybuff here contains the string from power analyzer module
               ptr = strtok(0, ",");          // ptr now contains string of watts
               count++;
               total += wattsec_;
               wattsec_ = atof(ptr);
               kw = wattsec_/1000;
               kwh = kw/3600;
               kwhrate = kwh * 4.0740;
               kwhsum += kwh;

               sprintf(kwdata, "%.2f", kw);
               //FloatToStr(kw,kwdata);
               sprintf(kwhdata, "%.2f", kwhsum);
               //FloatToStr(kwhsum,kwhdata);


                  if((count % 30) == 0){
                  ave = total / 1000;
                  ave2 = ave  / 3600;           //to kph /30 secs            // recode pagconvert**********************************************
                  sprintf(extra, "%.5f", ave2); // to GSM modem
                  //FloatToStr(ave2, extra);
                                                  // send to gsm program*************************************************************
                  ave   = 0;
                  ave2  = 0;
                  total = 0;
                  count = 0;
                  delay_ms(2000);

               }
               else if((count2 % 60) == 0){
                  rate += kwhrate;
                  sprintf(kwhratesum, "%.5f", rate);


                  rate = 0;
                  count2 = 0;
                  delay_ms(2000);
               }



               
               
               Lcd_Cmd(_LCD_CLEAR);
               Lcd_Out(1,1, "KW: ");
               Lcd_Out(1,5, kwdata);

               Lcd_Out(2,1, "KW/hour: ");
               Lcd_Out(2,10, kwhdata);

               Lcd_Out(3,1, "BILL: ");
               Lcd_Out(3,7, kwhratesum);
               Uart1_Write_Text(kwdata);
               
               Lcd_Out(4,1, "KWH/30SEC: ");
               Lcd_Out(4,12, extra);
               mypbuff = 0;
               break;
          }
     }
  }
}