Hi all, I am using P89LPC938 with internal clock freq of 7.37MHz.
& interfacing a bare 4 backplane * 13 segment display with it.
My aim is to reduce the current consumption for prolong use of the battery.
So i have used the DIVM reg of it. Using this the currents drops by 2mA(DIVM = 1), 4mA (when DIVM = 4). But the display starts blinking...
I dont know why this is happening. I am displaying my adc value in while(1)
after every 300msec.
Any notes to improve my understanding would be of great help to me.
Thanks!