Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

IC AT89LP51ED2-20PU instead of IC SST89E516RD-40-C-PIE

Status
Not open for further replies.

prakashvenugopal

Advanced Member level 1
Advanced Member level 1
Joined
Jun 1, 2011
Messages
473
Helped
15
Reputation
30
Reaction score
15
Trophy points
1,298
Activity points
4,973
Hi all,

Did anyone used IC AT89LP51ED2-20PU instead of IC SST89E516RD-40-C-PIE ?
These Two ICS are Pin to Pin Compatible. But I have to know whether it is code to code compatible or not.
My requirement is, I already have .hex file from SST89E516RD-40-C-PIE. I just have to program the .hex file to
that IC AT89LP51ED2-20PU .

Please let us know did anyone used this IC AT89LP51ED2-20PU instead of IC SST89E516RD-40-C-PIE or
any equivalent to IC SST89E516RD-40-C-PIE ?


Regards,
V. Prakash
 

You want to compare the datasheets, e.g. register maps. A t first sight both devices are not register compatible.
 
Hi,

Thanks for the reply. Any migration note from SST89E516RD2 to AT89LP51ED2 is available? Please reply.

regards,
V. Prakash
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top