Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Ibis to Spice file conversion - ibis2spice converter

Status
Not open for further replies.
K

Kicchan

Member level 3
Member level 3
Joined
Feb 3, 2010
Messages
56
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
1,759
Ibis to Spice conversion

Hello every1,
I converted an IBIS file (MC100EL31 D-FlipFlop) to a Spice file by means of ibis2spice converter. Notwithstanding, when I visualized the .olb in Capture I found more parts instead of my 1&only device. Also, these devices don't show the desired number of pin (6 instead of 8).
Did any1 try an ibis2file conversion? Where am I wrong?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top