IBIS-AMI files for Xilinx Kintex7

Status
Not open for further replies.
S

soheyl

Member level 2
Joined
Nov 5, 2004
Messages
50
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Visit site
Activity points
299
I want to simulate GTX buses of Xilinx Kintex7 in Cadance Allegro PCB SI tools; but I need IBIS-AMi files for it. Do you know from where I can find them for Kintex7 devices and is there any difference between using IBIS-AMI files and IBIS files in Allegro?

Thanks
 

Try Xilinx first...
Though most FPGA software will export an IBIS file complete with the drive currents you have set for your ports.
 

marce said:
Try Xilinx first...
Though most FPGA software will export an IBIS file complete with the drive currents you have set for your ports.
Click to expand...

On Xilinx website just IBIS files exists and these are not for GTXs.
 

I had the same problem with spartan6. then I had to contact Xilinx support, then they gave me the AMI models.
Normal ibis model and AMI model are totally different, they are not combined into one file.
 

As I said most FPGA compilers will spit out an IBIS file, try that, I have used these in preference to the generic files as the IO is preconfigured to the drive strength and pull up/downs catered for where applicable.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…