Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

I need ur help concerning an IR interface for mobile phones

Status
Not open for further replies.
hassenman

hassenman

Advanced Member level 4
Full Member level 1
Joined
Nov 29, 2004
Messages
117
Helped
4
Reputation
8
Reaction score
1
Trophy points
1,298
Activity points
912
well , i wanna build an IR interface to use with gsm phones ( nokia 6600 for example ) .
i don't wanna buy an ir module and i know they r cheap .
i wanna build it myself so please help me . i need schematics or anything about it
 

For transmit no schematic is need, just use a current limiting transistor directly to an IR LED on the TX pin of the serial port of the device you're trying to transmit from. For a 20ma LED I think 600ohms will about do it. Receive is a little harder. You need to connect the IR detector diode to an amplifier and have it level converted to RS232 levels. That I can't help you with.
 

Re: I need ur help concerning an IR interface for mobile pho

Check this file. Ignore the name of the file.
 

Re: I need ur help concerning an IR interface for mobile pho

try this
 

I need the source code for communicating betwoeen PC & mobile
 

Re: I need ur help concerning an IR interface for mobile pho

hey thank you! that was exactly what I needed
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top