I encount a problem using LPE of cadence.

Status
Not open for further replies.

zay_74007

Newbie level 3
Joined
Dec 15, 2003
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
32
the program stop here,the error:
Incorrectly built binary which accesses errno or h_errno directly. Needs to be fixed.
******************************************************************************* */N* GDS2OUT (REV. 4.9.12-2002 / LINUX /GENDATE: 25-NOV/2002 )
*** ( Copyright 1995, Cadence ) ***
*/N* EXEC TIME =14:58:15 DATE =15-DEC-2003 HOSTNAME = zhouay
******************************************************************************* * 0.114 Mbytes allocated to the current process.
* 0.010 Mbytes is still in use.
* THE END OF PROGRAM TIME = 14:58:15 DATE =15-DEC-2003 *

* THE END OF PROGRAM *

Thanks a lot.
 

The root cause, I think, is the uncompatibility between different Redhat releases. IC50 for linux was compiled for Redhat 7.2. Redhat 8.0 may support IC50 incorrectly. I found some situations linux version can not run correctly but solaris version can run without errors.
 

RedHat8.0 is OK for IC_50.
This problem comes from a bad glibc in Redhat9.0
 

Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…