SHAHROKH-ZEINALI
Newbie level 1
- Joined
- Jul 2, 2014
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 8
i am new in hfss, when i define a incident wave source and When we perform the following settings in Spherical vector setup.
in Iwavephi part:
start=0;
stop=360;
step=2;
and in IwaveTheta:
start=0;
stop=360;
step=2;
i face with this problem:
the total number of scan angle combinations of Iwavephi and IwaveTheta may not exceed 362; if you need more, consider using sub range controlled by a design variable.
I could not solve this problem by defining variables in the following directory:
HFSS==>Design Properties
can any one help me step by step?
in Iwavephi part:
start=0;
stop=360;
step=2;
and in IwaveTheta:
start=0;
stop=360;
step=2;
i face with this problem:
the total number of scan angle combinations of Iwavephi and IwaveTheta may not exceed 362; if you need more, consider using sub range controlled by a design variable.
I could not solve this problem by defining variables in the following directory:
HFSS==>Design Properties
can any one help me step by step?