Hspice simulation of cascaded transmission line [unstable?]

Status
Not open for further replies.
N

neoflash

Advanced Member level 1
Joined
Jul 2, 2005
Messages
492
Helped
10
Reputation
20
Reaction score
2
Trophy points
1,298
Visit site
Activity points
4,759
Hey, folks:

I am simulating a system of several cascaded transmission lines.

Hspice will give me very unstable waveform, while eldo is still very stable for same circuit. Which simulator should I trust?

For circuit view, I do not think that circuit should be unstable. How to make hspice give me right waveform?

thanks,

<<Gear option already used and doesn't help.>>
 

Re: Hspice simulation of cascaded transmission line [unstabl

In general, the spice matrix solution does't like high impedance nodes with no path to ground. For instance, two capacitors in series may not converge. I don't know how the component is made in hspice but you might try large resistors (multi megohm) to ground at the point where the transmission lines connect together. That should not affect your results but may help it converge.
 

I've used option gshunt=1e-5.
The situation doesn't change. Headache...
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…