dnanar
Junior Member level 1
- Joined
- May 8, 2014
- Messages
- 17
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 140
Hi,
I'm trying to learn how to use HSPICE through some tutorials and the reference manual but I'm running into a problem that I can't solve.
I want to know how my circuit responds for various input voltages through time:
However, I want to get the timing when some signal s15 arrives at 0.9*vdd so I do (the first line is just to display vdd*0.9):
My problem is that the value for vdmax stays always identical to the value in the first sweep... (stuck to 0.15*0.9). Does anyone know how to solve this? What is the proper way to do that please?
Thanks!
I'm trying to learn how to use HSPICE through some tutorials and the reference manual but I'm running into a problem that I can't solve.
I want to know how my circuit responds for various input voltages through time:
Code:
.tran 0.01p Tsimu SWEEP vdd 0.15 0.85 0.10However, I want to get the timing when some signal s15 arrives at 0.9*vdd so I do (the first line is just to display vdd*0.9):
Code:
.measure TRAN vdmax PARAM = 'vdd*0.9'
.measure TRAN t WHEN V(s15) = vdmax RISE=1My problem is that the value for vdmax stays always identical to the value in the first sweep... (stuck to 0.15*0.9). Does anyone know how to solve this? What is the proper way to do that please?
Thanks!