Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

hspice- corners simulation

Status
Not open for further replies.
J

jutek

Full Member level 4
Full Member level 4
Joined
Oct 21, 2005
Messages
211
Helped
6
Reputation
12
Reaction score
1
Trophy points
1,298
Activity points
3,140
hello

Could you tell me, how to set corners simulation in the hspice or give me any links, please.


regards
 

use '.alter', see hspice manual in detail
 

rambus_ddr said:
use '.alter', see hspice manual in detail
Click to expand...

you mean that in one corner i simply set .alter with given vdd, temp and devices special model?

as uncle_urfi wrote here
"For ANALOG design, using a Monte-Carlo analysis is a better idea."

how to set Monte-Carlo analysis then. any examples?

what parameter's values distributions, which parameters in a simple opamp design

regards
 

.alter is very well
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top