Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to write a driver for a device behind two bridges (PCI cards)?

Status
Not open for further replies.
ubuntu_amateur

ubuntu_amateur

Member level 4
Member level 4
Joined
Sep 24, 2006
Messages
71
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,665
how to expand PCI bus?

As shown as below,
The intention is that Card A is plugged into the PCI slot of PC motherboard;
and, Card B is plugged into the PCI slot of Card A.
Card A is a bridge, also Card B is a bridge.
that is for performing the expansion of PCI bus.

PC-----PCI card(A)-----PCI card(B)


Questions are:
WindowsXP and Linux operating system support them?
Why OS can't recognize the device connected to Card B behind Card A?


Any hints will be appreciated!
 

PCI expansion issues

that means how to write a driver for a device behind 2 bridge.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top