How to use SBL1 double balanced frequency mixer ???

Status
Not open for further replies.

nikhilsigma

Full Member level 2
Joined
Jun 19, 2010
Messages
142
Helped
17
Reputation
34
Reaction score
16
Trophy points
1,298
Location
Delhi, India
Visit site
Activity points
2,584
I need to find the difference of two frequencies, so I am trying to use SBL1 double balanced mixer...

I was giving 5Vpp,1MHz on LO & 3Vpp,1.1MHz signal on RF frequency from function generator....so I should get 2.1MHz and 100KHz....but the signal i am getting is having 2.1MHz as the lowest frequency signal and another high frequency components but 100KHz was totally missing !!!


Circuit I have Build :

SBL1 Datasheet :
https://www.google.co.in/url?sa=t&r...=h7vESbnYLx7Rd9bJwViYgQ&bvm=bv.43828540,d.bmk

Please help....
 

If your SA cannot see down to 100kHz, place at the output of the mixer a simple LPF to let only 100kHz to pass. Terminate the LPF in concordance, and measure the voltage over the load to find the equivalent power level

 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…