How to use Pi number in component parameter ?

Status
Not open for further replies.
C

Chr's

Junior Member level 1
Joined
Sep 26, 2014
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
121
Hi all,
My quesiton is about the pi number. Can i use it as parameter to define a component value ?

For instance, n a 1st order low pass filter
I've an ideal capacitor, where is value is defined by resistor and frequency values (give in CDF of the top cell) and the pi number.
The capacitor value is defined by: 1/(2*3.1416*pPar("r")*pPar("frequency")) F
But i beleive that i'm getting some simulation error due to non exact value of pi number, here defined equal to 3.1416.
I'would like to know if I can use a value with more accuracy whitout put in by hand like: 3,141592653589793

I tried to use pi, PI, pi() and PI() but nothing work.

Any Idea ?

Thanks in advance for your help
 

Things to try:

* Put the word 'Pi' in a cell by itself. Then command its value to be displayed somehow. Watch what value it is given.

* For the value of Pi, use 3 with no decimal point. See if it is accepted.

* Split up your long calculation among several cells. This can help you track down the error.
 

Chr's said:
... if I can use a value with more accuracy whitout put in by hand like: 3,141592653589793
Click to expand...

Sometimes I use an inverse trigonometric function like π = 2*arcsin 1 = 2*arccos 0 = 4*arctan 1

(in the Wiki, scroll down to Special values in trigonometric functions).
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…