Hello Sirod,
u r welcome..8). Here are the answers for new queries...
1) in the TONE block the (FRQ.)- tone frequencies parameter. Enter a vector of frequencies for multiple tones, for example {1.5,2.5,3.5} GHz for three tones at 1.5, 2.5, and 3.5 GHz, or use the "stepped" command, as in stepped(1.5e9,3.5e9,1e9). Please note that when using the stepped command or a variable, the frequency units revert to the basic frequency unit (Hz), even if the default unit of the project (specified under Options > Project Options > Global Units) is something else.
Go through the following VSS example "LIN_S_Touchstone.emp" TONE blocks FREQ parameter set as stepped(2.3g,2.6g,0.001g) which sweeps frequency...
Also see the attached simple example...
2.
Yeah, you need to do some calculated Radom tuning ...Upload your VSS file (*.emp) then will know how to setup to achive the results...
3. hmmmnnn... looks roated lot use the Imbalance block (Magnitude, Phase & DC shift) to correct the same, I tried but looks i need to set exact values to correct...
try yourself by using the attached example ...
---manju---