How to use LPKF milling machine?

[nandopg]

Has anyone been using LPKF milling machine? I would appreciate to have some help in this matter.

Thank you

NandoPG

 

[iberia]

use lpkf machine

I use lpkf 91 with system MSDOS, what you need?

nfire:


iberia

 

[felix1200]

lpkf milling order

Hi Nandopg,

what kind of help do you need ?
I use LPKF sometimes.

felix1200

 

[bigfoot]

lpkf milling machine price

I used it before, what do you need help. If your question is simple , I will reply answer.
Bigfoot

 

[Santa]

lpkf reset

I currently use a LPKF milling machine.

Worst problem I found, registration problems between top
and bottom sides. I mean random errors that nothing can get rid
off. Otherwise, they work OK.

 

[hobbymat]

I've used two models, 91s and 95s. Both are fine for prototyping, and you can do marvellous things with the latter model.

There were sometimes registration problems in two-sided boards, but the reason was always that the registration pins were not on the exactly same line or Y coordinate as the "home" position. Sometimes the control software (BoardMaster) may have reset or altered the calibrated "Home" position, but that was fixed by upgrading to the newest version.

Hobbie

 

[weeyndha]

LPKF milling machine

Hi all,

What kind of motor (spindle) that used by LPKF?

Regards

 

[kekon]

Re: LPKF milling machine

I have Protomat C60 LPKF machine and 5-year experience with it. I have also equipment for covering holes with copper when producing boards with metalized holes. No serious problems occured since i have been using it. Obviously care must be taken when operating the machine as it is very precise equipment. The problem is only with the User Manual which is very poor and lacks of very important information. I had to learn how to operate machine for 3 months
The problems mentioned in previous sections (concerning positioning Y-axis for double-sided boards) can be easily solved with some tips and tricks. If you have any questions don't hesitate to ask