How to use 16f877A instead of 18F452 in LedMatrix

Status
Not open for further replies.


No! My rows is anode and columns for cathode. Because i'm using bi-colour common cathode only. Or if I used 8x8(w/out bi-colour), I would prefer common cathode all times.

The transistor can be used any transistors such as NPN2N2222 or 2N3904 or general transistor.

For resistor, every dot matrix will come with 20mA limited for red led only. U will have known that dot matrix and also voltage is 5V. To calculated ohms law voltage/mA= +/-resistor with 1/4 or 1/8 watts. I used 220 ohms with 1/4watts. It is up to u, so u can use range 180-330 ohms.

Btw, I'm using mikroBasic pro.
 

so for example if your'e using 74hc154 in your rows and 74hc595 in your columns, so that mean your columns should be in anode and your rows will be cathode?
 
cuber18 said:
so for example if your'e using 74hc154 in your rows and 74hc595 in your columns, so that mean your columns should be in anode and your rows will be cathode?
Click to expand...


Absoultely! I still have 74HC154 on seperate board
 
Re: pic16F887

@supra
do you have a schematic diagram in proteus for this code?
 

Re: 16f877a dot ledmatrix 8x8

@supra
i try your code and the scem but it doesnt work
 

Re: 18f452 external oscillator

hai,

can u inform me the power supply part all matrix led's. and i need to display the big character how can i do. kindly give some idea's.
 

hi,

i want to display double row of 8x8 matrix. how can i do?. kindly reply.

- - - Updated - - -

hi,

i want to display double row of 8x8 matrix. how can i do?. kindly reply.
 

Re: pic16F887

can you please post the circuit of your project,it can be helpful to many peoples.

Thanks
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…