Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to translate compartmentalized liver to analog computer? I Just want to learn to translate the figure to equations.

Status
Not open for further replies.

shivajikobardan

Junior Member level 2
Junior Member level 2
Joined
Oct 23, 2021
Messages
24
Helped
0
Reputation
0
Reaction score
2
Trophy points
3
Activity points
292
Highly reputed source(International)-:

The compartmental analysis figure is the diagram that I want to translate to differential equations and eventually analog computer.

hiSajNSaF-GF0TJMhgEF81OicOab-mEZ-14VKnbDOVlN4xkUso7kzwsWhEHWiFOYd7Db9SCdQZOnXgakCDr4_y3Hz5SdgXywMzqD3MVEJK3WUbypypOK6WR3A-tM4a6CJAavzHSpBvX90Am6NG4

R6noRBIsks11nGaFik3RskFZeCQ8Z_As3CrkXFaO40TzyZItamLNtidIZWrsX51tpJK0oWHFg9Nt9mv4xX63lRgy5BQpZfEk0z3upRiTCpdVqdlihWRy3PHZMvsTLUJA9dO-zQwxwUU31nunOjQ


This is from
A9Yra5PRO8yrVklGO7HSPMuHMJCx3GGAli3GJyy-8S0nBdjSsomCs5THeT8_QTJpljRew9u_igENhaLyuxrJzKCa3ZibcIfSZcBvR0VJlS5yAIG9rRElbMdWSGXrXs9wmdzy6viqi4Plv7K7f3U

This book. IDK about the author, but I bet that this is extremely reliable compared to the materials locally available and written by local authors. But it doesn't tell which equation it is modeling, so I am not 100% sure about it.
It has problems as well-:

It doesn't use negative for K12 And idk why is it using negative for K23.


Less reputed source-:
s-3re_8EKRg6r17c2HsVD828QaPEIOrn7_Hd7TIFqKQU-irKG9tlxBL2nrtizftTDA6rfio9Xxi3VF1cuxsC7nhy3jY-AgbI7xWTHQqBMf-z7qhBEpLL8Jj4cb81R72rDRT0ilbaMUXmKbB_DGw

This is pretty ambiguous, their equation and figure don't even match.

Highly reputed source(LOCAL)-:
gA3PYyg1qV0Wwj4c_MCe0b9Wb3xCxAIvww9I5ogSW6mYftaiXRVZmCN17uVsT_tGHWsrq1e6_a3NOKY2RDNnyupCTqLpTT4SIvMq1SB9fH9oJrKORw_ezaQGWuMpBcTPAQecq8f9Jc0Khhh4Zzk

Ya7WSrqUpwkKLJXqB2vzh00VIpIdybqRpzIQDcmlcff5RLS2xZoiPEKwGueO0nJml4iLbvmundFNDJYxo9oKDJrNi2r6TycPts17TsZdXF0RxGScdqYtXaCC7FTXMb1MDOLqpPU_IFqo0d_8ZVE

9IE7Xh85UlkSGvmRI9Vw6l3xc8_3PbwfGc9oHidroeDhkbvriDdf1TQxiZdEx_28MOjUdmFBkVmxupUhPRrrr_FT9Rr0oIDZsCRKjyTAAlweFx5lAT0juZXxmJGLMgndHLg6uoLvjYUW28E7QuU



My thoughts about sign what they should be-:

If the arrows are coming towards the block in consideration, add + sign else add - sign.
For eg-: consider x1 block, then we find x1', for that + will be what comes inside i.e K21*x2, and - will be what goes outside ie.K12*x1.

My Teacher(He hasn't written any pdfs that I know of)-:
He says "some books have written plus(in K21) while some minus I am not sure what it is actually."
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top