saavedra29
Newbie level 5
- Joined
- Jan 10, 2013
- Messages
- 10
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Greece
- Activity points
- 1,371
Hello. I've bought two RF modules, a transmitter and a receiver, both at 315 MHz to make 2 microcontrollers talk to each other.
But i have problem making them talk using their serial ports. So i wonder:
Before doing anything else is there a simple way, i.e. a simple circuit to try, that i can be sure that they work properly?
Because it's a loss of time trying to make something work if it has a hardware problem.
Thanks!
The modules are like these
- - - Updated - - -
20 minutes after writing the post i made it work. So the topic is solved.
But i have problem making them talk using their serial ports. So i wonder:
Before doing anything else is there a simple way, i.e. a simple circuit to try, that i can be sure that they work properly?
Because it's a loss of time trying to make something work if it has a hardware problem.
Thanks!
The modules are like these
- - - Updated - - -
20 minutes after writing the post i made it work. So the topic is solved.
Last edited: