Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to test a IRF P240N ( HEXFET Power MOSFET ) with a DMM ? Should it have infinite

Status
Not open for further replies.
M

munzir

Full Member level 6
Full Member level 6
Joined
Oct 11, 2011
Messages
365
Helped
22
Reputation
44
Reaction score
21
Trophy points
1,298
Location
Pak
Activity points
3,795
How to test a IRF P240N ( HEXFET Power MOSFET ) with a DMM ?

Should it have infinite resistance readings between Gate & Drain And Gate or Source for both forward & reverse biase ......... ??

thanks
 

Should it have infinite resistance readings between Gate & Drain And Gate or Source for both forward & reverse biase ......... ??
Click to expand...
Yes, should have.
 

but what across Drain & Source ?

Set the DMM on Diode Range and then measure all the 6 readings out of which 5 are infinite (high) and 1 is finite (low) ???
 

Both MOSFET & POWER MOSFET of any kind have the same testing procedure ?
 

why analog meter is more reliable and better for testing any kinda MOSFET ?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top