Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to step up voltage from 3.3V to 18V without using booster ?

Status
Not open for further replies.
R

ricky_wcy

Junior Member level 3
Junior Member level 3
Joined
May 22, 2005
Messages
29
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,537
Hi Folks,

External booster is required to step up voltage from 3.3V to 18V to drive OLED.
The max. loading current for OLED is around 20mA.

Is there any cheap alternative method to step up voltage from 3.3V to 18V instead of using booster ?

Thanks,
Ricky
 

Re: Booster

There are many boost IC switching power supplies. You could consider some alternative such as using a 20 V source at the beginning. This is low cost for a mains powered product. It gets more expensive if your device is battery powered. You will need several more cells to start with nearly 20 V.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top