Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to simulate the circular polarization in CST-MWS ?

Status
Not open for further replies.

Kit-the-great

Full Member level 3
Full Member level 3
Joined
Mar 30, 2002
Messages
150
Helped
5
Reputation
10
Reaction score
3
Trophy points
1,298
Location
Russia
Activity points
1,318
circular polarization cst

As I understand, the circular polarization can be present as superposition of two ortogonal linear polarization with pi/2 phase shifting, but maybe somebody knows, how to define the circular polarized signal on the port directly ?

Thanks.

Kit-the-great
 

how to simulate polarization

I suggest to see the examples on the installation directory of MWS; under the directory examples\Transient Analysis\S Parameters\Waveguide Devices there is an Orthomode Trasducer example that is a good reference to solve your doubt.

Regards.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top