Saeedk9574
Member level 3
- Joined
- Nov 6, 2023
- Messages
- 67
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 6
- Activity points
- 530
Hi everyone,
I am working on a circuit that needs an opto-mosfet like 210EH or CPC1008N which I attached the datsheets.
Because I can not find the mentioned part numbers in the market of my country, I’d like to replace the opto-MOS with a combination of discrete components to achieve the same functionality.
I’m considering using a MOSFET and an optocoupler (with transistor), but I’m not entirely sure about the best way to design it. Here are my specific questions:
Thanks in advance for your help!
I am working on a circuit that needs an opto-mosfet like 210EH or CPC1008N which I attached the datsheets.
Because I can not find the mentioned part numbers in the market of my country, I’d like to replace the opto-MOS with a combination of discrete components to achieve the same functionality.
I’m considering using a MOSFET and an optocoupler (with transistor), but I’m not entirely sure about the best way to design it. Here are my specific questions:
- What components (e.g., MOSFET, transistor, resistors, diodes) would you recommend for this application?
- How should I design the driver circuit to ensure reliable switching?
Thanks in advance for your help!