Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to reduce phase margin in a folded cascode OTA?

Status
Not open for further replies.
W

WINNIEMATHEWS

Newbie level 1
Newbie level 1
Joined
Jan 30, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
AZ
Activity points
1,287
Hi,
I have to design a Folded cascode OTA with gain>50 dB, Unity gain frequency 25MHz, Phase Margin of 60 degrees , PSRR>55dB and CMRR> 55dB for a 5 pF capacitive load.

I am able to satisfy all the conditions except the Phase Margin of 60 degrees. I am getting a phase margin of 70.
How can I bring it down to 60 without affecting my Unity gain frequency?
Please help..
 

Folded Cascode

If you have 70 degrees of phase margin, you do not need to do anything. The specified phase margin is usually a minimum value.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top