harsimran315@gmail.com
Newbie level 5
- Joined
- Feb 18, 2014
- Messages
- 9
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 56
Respected all
Can anybody help me out that how to apply ports in ADS 2011 for FEM analysis of a CPW line. The previous version used a different method of making ports as ground reference but ADS2011 does not have the facility to do so.
Please refer to the image shown. I want the central line to be signal and side lines to be ground reference. and i tried to implement the method of slot lines but when i start the FEM analysis it says that magnetic ports are not valid.
PS port 1,2 are input and output (+ve)
and port 3,4,5,6 are (-ve).
As i want the layer connected to port 3,4,5,6 to be ground refference
Can anybody help me out that how to apply ports in ADS 2011 for FEM analysis of a CPW line. The previous version used a different method of making ports as ground reference but ADS2011 does not have the facility to do so.
Please refer to the image shown. I want the central line to be signal and side lines to be ground reference. and i tried to implement the method of slot lines but when i start the FEM analysis it says that magnetic ports are not valid.
PS port 1,2 are input and output (+ve)
and port 3,4,5,6 are (-ve).
As i want the layer connected to port 3,4,5,6 to be ground refference