[SOLVED] How to perform a Line transient in Buck converter using cadence?

Status
Not open for further replies.
A

AMSA84

Advanced Member level 2
Joined
Aug 24, 2010
Messages
577
Helped
8
Reputation
16
Reaction score
8
Trophy points
1,298
Location
Iberian Peninsula
Activity points
6,178
Hi guys,

The topic says everything. I would like to perform a input voltage step to see how my converter reacts.

How can I do this? I have tried using VPWL but without success. An error occured, saying that Time is not strictly increasing. Don't know why.

Regards.
 

AMSA84 said:
Time is not strictly increasing.
Click to expand...
Probably an error in your VPWL source timing. If you have more than one VPWL sources, their timing must be synchronized.
 
Reactions: AMSA84

    A

    AMSA84

    Points: 2
    Helpful Answer Positive Rating
I usually stack vdc, vpulse sources. For the PWL source, check
the t0, t1, t2... timepoints in the vpwl property list and make
sure they are (as the error message complains) monotonically
increasing.
 
Reactions: AMSA84

    A

    AMSA84

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…