Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to obtain VectorCardiograph(VCG) signal????

Status
Not open for further replies.
D

darlling5147

Member level 3
Member level 3
Joined
Jun 28, 2006
Messages
55
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,632
I'm currently doing my final year project with the title of VECTORCARDIOGRAPH MONITORING SYSTEM.

I done the sensor and sucessfully obtained ECG signal. Now I facing the problem of obtaining VCG signal, which is vector of ECG. i tried using LABVIEW to plot the graph but failed.

Could anyone teach me how to get the signal? and also tell me the correct lead placement.

PLS GIVE ME SOME INFORMATION....I LEFT 4 WEEKS FROM MY SUBMISSION DATE :((

THX FOR ANY REPLY.....SINCERELY
 

As I remember, there are seven electrodes in ECG. One on both arms, left leg, and four of them in an arc above the heart, starting above and little to left (second electrode is directly above), and fourth is more to the right than it is above.
Try googling it out, it is a common info on ECG.
 

Beowolf said:
As I remember, there are seven electrodes in ECG. One on both arms, left leg, and four of them in an arc above the heart, starting above and little to left (second electrode is directly above), and fourth is more to the right than it is above.
Try googling it out, it is a common info on ECG.
Click to expand...

i did try out the method u mentioned but cant get VCG signal. ECG already done,now left VCG...google/yahoo search always show out a software(SKYLAB) to get VCG...that's y i post this topic here n hope got someone know how to do n teach me.....

anyway,thx ur info very much.....as least i know still got ppl read my post :)
 

have you tried with a sound program?! I have done something similar, much more simply, and I play it with a sound program.
 

AlexNadal said:
have you tried with a sound program?! I have done something similar, much more simply, and I play it with a sound program.
Click to expand...


sound program?how?i dunno how to use.....

anyway,thx ur suggestion..u r so kind
 

May be Matlab is more suitable for such a task, I saw a commercial solutions for ecg analysis in Matlab
 

tantony said:
May be Matlab is more suitable for such a task, I saw a commercial solutions for ecg analysis in Matlab
Click to expand...

i know but i not familiar with matlab.....

do anyone know how to use labview to plot graph?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top