gyrajput
Junior Member level 1
- Joined
- Sep 19, 2013
- Messages
- 15
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 92
Hello all,
I need to get output of my matlab simulation on spartan 6 XC6SLX150T FPGA LCD display,
steps are as follow
1) i run my simulation with xilinx 14.1 system generator,
2) i run the .xise file generated in matlab with the xilinx 14.1,
3)the program get synthesize, implemented design, generated programming file,
4)in configure Target device i add the .bit file........
but no program succeeded .....
can any one help me how to get my output on LCD display please help me.......
i had attached the print screen file in attachment........
I need to get output of my matlab simulation on spartan 6 XC6SLX150T FPGA LCD display,
steps are as follow
1) i run my simulation with xilinx 14.1 system generator,
2) i run the .xise file generated in matlab with the xilinx 14.1,
3)the program get synthesize, implemented design, generated programming file,
4)in configure Target device i add the .bit file........
but no program succeeded .....
can any one help me how to get my output on LCD display please help me.......
i had attached the print screen file in attachment........