When routing a trace you can specify the width in the "Width" field. You can choose predefined values or enter a value manually.
A trace width can also be changed afterwards by entering or clicking: change --> width --> value --> click on the trace which should be changed
When routing a trace you can specify the width in the "Width" field. You can choose predefined values or enter a value manually.
A trace width can also be changed afterwards by entering or clicking: change --> width --> value --> click on the trace which should be changed
PLEASE BE MORE SPECIFIC WHAT AND WHAT TO BE DONE;WHAT IS WIDTH FIELD
,SCHEMATICS OR THE PCB SECTION. CAN YOU PLEASE SHOW IT WITH DIAGRAM
THANK YOU[/b]