Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to make Cadence design kit work for ADS

Status
Not open for further replies.
Z

z3phyr

Junior Member level 2
Junior Member level 2
Joined
Feb 8, 2005
Messages
23
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
125
Hi all
I'm taking an RFIC course and we have this Cadence design kit from NCSU. I'm wondering if the kit could be used for ADS simulation as well because I will need to do some harmonic balance simulations.

I'm trying to figure how to setup the dynamic link with our CAD engineering here but on the hand, I've wondering if it will work if I just type all parameters from the spectre model file into the ADS BSIM3 MOSFET model?

Anyone has experience on that?

Thanks a bunch
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top